LORD 406 5 GALLON PAIL

LORD^* 406 acrylic adhesive in combination with LORD Accelerator 19 or 19GB replaces welding, brazing, riveting and other mechanical fastening methods especially in low-temperature environments subject to high impact or high peel loads.
LORD 406 acrylic adhesive when mixed with LORD Accelerator 19 or 19GB creates an adhesive system that will bond a wide variety of prepared or unprepared metals and engineered plastics. The adhesive system is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.
LORD 406 acrylic adhesive can be mixed with either LORD Accelerator 19 or LORD Accelerator 19GB. LORD Accelerator 19 improves the high temperature resistance of LORD 406 acrylic adhesive, and is available in off-white or black. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads. LORD Accelerator 19GB is available in off-white, red or gray.

Shelf Life

Shelf life is six months when stored at temperatures under 80°F (27°C) in original, unopened container. For maximum shelf life, storage temperatures of 40-50°F (4-10°C) are recommended. If stored at these cooler temperatures, allow product to return to room temperature before using. Protect from exposure to ultraviolet light. LORD 406 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.

Features and Benefits

• Versatile - bonds a wide range of unprepared metals with minimal substrate preparation; bonds difficult plastics such as XENOY^*.
• Temperature Resistant - performs at temperatures from -40 to +300°F (-40 to +149°C).
• Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to UV exposure.
• Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.