H2O Glue

H2O Kit #1 Professional Pak-50 Kit

SKU: H2O-KIT1

$99.05

Discount (%)
8 %
Quantity:
  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

The H2O Kit #1 Professional Pak-50 Kit contains everything you need to begin using our H2O Aquabonder Glue. Each kit contains the correct dispense gun along with (2) 50 ml cartridges of our H2O Aquabonder Underwater Adhesive as well as (10) Extra Mixing Nozzles so you can use the adhesive the next time you need it. 

Each Kit Contains:

  • (2) tubes of H2o Aquabonder 50 mL
  • (1) Pak-50 Dispense Gun
  • (10) Extra Mixing Nozzles

H2O Underwater Glue is a toughened structural adhesive used to bond to ABC Plastic, Fiberglass and PVC. The H2O Glue is perfect for repairing pipes, skimmers and main drains.

Bonds To: PVC, Fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane,wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated

Product Features:

  • Minimal surface preparation
  • Room temperature cure 
  • 1:1mix ratio 
  • Rapid fixture in thin set 
  • Non-sagging formula
Application Instructions:
  1. Apply mixed product directly to one surface in an even film or as a bead.
  2. Assemble with mating part within recommended working time.
  3. Apply firm pressure between mating parts to minimize any gap and ensure good contact, (a small fillet of product should flow out the edges to display adequate gap.)
  4. Bond line thickness of mixed adhesive should be @ .015″-.030″ for optimum adhesion
 
 
Uncured Phyical Properties:
 
 
Color Off-White/Straw
Working Time 4-6 min. @ 72°F, 22°C
Fixture Time 10-15 min.@72°F, 22°C
Functional Cure 45-60 min.@72°F, 22°C
Full Cure 24 hours
Flashpoint 51°F
Mix Ratio by Weight/Volume 1:1
Mixed Density 8.20lbs./gal. / .98gm/cc
Mixed Viscosity 50,000 cps
 
 
Cured Physical Properties (7 Days @ 72°F):
 
 
AdhesiveTensile Lap Shear[ABS] 1,300 psi
AdhesiveTensile Lap Shear[GBS] 3,500 psi
AdhesiveTensile Lap Shear[Polycarb] 1,400 psi
Gap Fill 0.125 in.
Impact Resistance 22 ft.lb./in^2
Service Temperature -67°F to 250°F
Shore Hardness 78 Shore D
Solids by Volume 100
Specific Volume 28.1 in^3/lb
Tensile Elongation % 15-25%
Tpeel 35-40 psi

Additional information

Weight 3 lbs
Dimensions 6 × 6 × 6 in
Manufacturer

Product Restrictions

Component

Ratio

Must Ship Freight

Country Of Manufacture

Origin

Reviews

There are no reviews yet.

Be the first to review “H2O Kit #1 Professional Pak-50 Kit”

Your email address will not be published. Required fields are marked *