EMULSION ADHESIVES (WHITE GLUES)

EMULSION ADHESIVES are water dispersions of small particles of high strength adhesive materials such as polyvinyl acetate polymers, copolymers and resins. The bond is formed by the absorption of water by the substrates. This adhesive is primarily used on porous materials such as wood and wood products. However, other combinations of materials may be bonded, such as plastics and metals, as long as one surface will absorb water. Though very strong, these adhesives should not be used in high stress post forming.

USING EMULSIONS:

Except with tightly fitting parts, joints should be clamped during the setting period which is about 30 minutes and full cure or strength develops in 24 hours. Adhesive may be applied to only one surface. Various formulations of this adhesive are available for industrial use other than the general purpose products found in retail stores. Emulsions are not gap filling and should be used only on well fitting tight joints. Joints are water resistant but not water proof.
SELECT EMULSIONS for quick setting strong joints on wood and other porous materials.