SURFACE MOUNTED FASTENERS

ATTENTION
Chemical Concepts, Inc. was recently contacted about the structural failure of a sink undermount. A quick examination of the failed undermount
revealed that the installer had purchased a substandard copy of our No Drill™ fastener! It is said that “imitation is the sincerest form
of flattery”, but not when the copy is inferior and presents a likely danger of failure. Do not be fooled by cheap imitations! Rely on the
original No Drill™ fastener - pioneered, thoroughly tested, and constantly upgraded by Chemical Concepts, Inc. since 1999.
Chemical Concepts, Inc. has worked very closely with Rotaloc, the manufacturer of the NoDrill™ fastener, from the inception of our
concept, through initial design, testing and improvement. Steve Harris the owner of Rotaloc, states: “Our technology, custom manufacturing
equipment and vast knowledge of the welding process assures that every product stamped with the Rotaloc® name is guaranteed to be of
the very highest quality”. Upon further examination of the failed undermount, Rotaloc engineers report, “it is no wonder that they are falling
apart in the field. There is no doubt in our minds that those copies will ultimately result in failures.”
We all want to look for ways to save a few dollars in these tough economic times, but saving a few cents on an inferior product can have some
very expensive consequences in the event of a failure and based on our tests and analysis, the copies will fail. Chemical Concepts, Inc. has
sold millions of No Drill™ undermounts since 1999. We have upgraded our products several times in the 9 years since we introduced the No
Drill™ concept to the fabrication market. We stand behind our products 100% with extensive testing by an independent lab. We can assure
our customers that with the proper installation procedures, our products will not fail.
Only the Chemical Concepts, Inc. No Drill™ fastener has offsets to assure that you get a proper bond line and grooves to improve
adhesion to the countertop. We developed the first No Drill™dish washer fastener and later introduced the adjustable No Drill™dishwasher
fastener. Only Chemical Concepts, Inc. has 45 years of adhesive experience and the expertise to solve your fabrication
problems. During this time, copies, fakes and knockoffs of inferior quality have come and gone. Rest assured,
our dedicated sales and technical staff is here to assist you today and will be here for you in the future, always
providing the very best products and value to meet your requirements and highest expectations.