Adhesive Systems MP54270 Clear Electrical Potting Epoxy

Description

MP54270 is a two part unfilled electronic grade epoxy encapsulant designed for small to medium sized castings. It cures quickly at room temperature to a tough, semi-rigid polymer. It has good wetting and adhesion to most surfaces and is free flowing to penetrate voids and give good air release. It has very good resistance to water, acids and bases and most organic solvents. It was formulated to a 1A:1B volume mix ratio for use in side-by-side cartridges and meter/mix dispensing equipemnt. MP54270 will reach full cure at room temperature within 24 hours.

Physical Properties:

     Ratio:                                           1 to 1

     Viscosity:                                    20,000

     Color:                                           Clear

     Work Life:                                    60 Minutes

     Shear Strength:                          1,800-3,000 psi

     Dielectric Strength:                     550 Volts/Mils

     Hardness Shore D:                      85