Advanced Search
Add to Wishlist Add to Compare

ChemSet™ C-30 Marblemaster "Dripless" Seaming Adhesive (250 ml)

SKU: CCA-C30
Price From: $25.00 / EA
// All instances of $this->hasOptions() replaced below (cshontz 11/15/16) // New: $_product->getTypeInstance(true)->hasOptions($_product)

* Required Fields

Price From: $25.00 / EA
Add to Wishlist Add to Compare

Products to go with ChemSet™ C-30 Marblemaster "Dripless" Seaming Adhesive (250 ml)

Price From: $74.00 / EA

Information




C-30 Marblemaster is a two-part methacrylate, super flexible, dripless/non-sag, low shrink, low exotherm, ultra violet light stable, non-yellowing hard surfacing adhesive designed for the nearly seamless bonding of Porcelain, sintered stone, glass, engineered stone, marble and quartz, and natural stone products. Combined at a ratio of 10:1 (10 parts resin, one part activator), C-30 has a working time of 10 to 15 minutes, with a 5 to 10 minute De-Roping Time, and achieve nearly 90 percent of its ultimate strength in 45 to 60 minutes at room temperature curing.

C-30 offers a combination of high strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials. When combined with the proper use of ChemSet's ProBond surface cleaner/activator, C-30 provides high strength bonds to virtually any stone, engineered stone or quartz or granite products, including porcelain, sintered stone, and glass. With the use of ProBond, stone fabricators can bond successfully to wet stone, although bonding underwater is not permitted or recommended.

C-30 permits the seasoned fabricator the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces, without dripping, and upon gelation, give the fabricator an extended window (5 to 10 minutes) to de-rope, or trim with a single bladed straight edge razor blade, the excess from the stone slab without ripping the adhesive out of the joint, nor damaging the surface of the stone.

Additionally, since the product is supplied in cartridges, unlike other cartridge adhesives in the market, wherein the resin (large side) is pigmented, with C30, the activator (small side) is pigmented. For the fabricator, this means that when he sees color, he knows that the product is catalyzed, and will get dry/react/get hard 100% of the time.

Additional Information

Market segment N/A
msds No
technical No
SKU CCA-C30
Unit of Measure EA

Product Downloads

C-30 Color Reference Sheet (Size: 362.2 KB)
C-30 Flyer (Size: 864.3 KB)
C30 SDS (Size: 446.8 KB)
C30 TDS (Size: 4.5 MB)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Properties/Specs

Brand: Adhesive Systems (ASI)