Conathane® EN-11 Polyurethane Encapsulant PartB Gallon

$0.00
SKU
CYT-EN-11 PartB-01G
CONATHANE EN-11 and EN-12 are two-component, highly flexible liquid polyurethane molding and encapsulating systems that ensure the performance of electrical/electronic assemblies exposed to severe environmental extremes. Elastomers prepared from these systems exhibit the following outstanding properties:
• Superior hydrolytic stability
• Non-MbOCA curing systems
• Excellent flexibility
• Low dielectric constant
• Low viscosity
• Thermal shock resistance (-70°C to 135°C)
• Exceptionally high dielectric strength (600 vpm)
• Fungus resistance
The systems are recommended for cable and connector potting and molding - both military and commercial, electronic module potting, wire wound device encapsulation, and strain sensitive component potting. Their excellent moisture resistance also suggests their use as 100% solids thick-film coatings for printed circuitry or, because of their solubility in most commercially available solvents, as flexible thin-film coatings. These systems have also shown exceptional adhesion to a wide variety of substrates. The electrical properties of these systems are excellent; the dielectric
constant and dissipation factor are exceptionally low and remain relatively unchanged over the recommended operating temperature range of -
65°C to 130°C
CALL FOR PRICING
THIS PRODUCT HAS 4 WEEK LEAD TIME AND MUST MEET MINIMUM 
Write Your Own Review
You're reviewing:Conathane® EN-11 Polyurethane Encapsulant PartB Gallon