DEVCON® FL-10 Flexane® Primer - 4 oz

This is a hazardous material, shipping restrictions and surcharges may apply.

DEVCON® FL-10 Flexane® Primer - 4 oz is available to buy in increments of 6

A one-part adhesion promoter primer used on metals for ultimate adhesion of all Flexane urethanes..


  • Moisture cure primer
  • Dries in 5-15 minutes
** As humidity rises primer takes longer to cure

Intended uses
After shotblasting a good primer before coating with any Devcon metal-filled epoxy.
Priming all metals before applying any Flexane products Dries in 30 Minutes

Physical Properties:

  Cured 7 days @ 75° F

       Coverage/4 oz.:                                     10 sq.ft. @ 5 mils

       Cure Time:                                              5-30 minutes

        Metal immersed in water:                     1 coat FL10 and 1 coat FL20

        Metal, dry:                                              Adhesion (2 Coats):  50-75 pli

        Metal dry:                                               Adhesion (1 Coat):    25-50 pli

       Percent Solids by Volume:                    15%


Write Your Own Review
You're reviewing:DEVCON® FL-10 Flexane® Primer - 4 oz