Pacer Anaerobic Primer1 gal

$103.20
SKU
FG09628

Pacer Technology Anaerobic Primer (FG09628, FG09621) can be used with Pacer Anaerobic Threadlockers.

With anaerobic threadlockers, fixture time and cure speed is dependent upon surface activity of the metal being utilized and dependent upon which threadlocker is being used.

Anaerobic Primer will increase cure speed and increase gap filling ability of the anaerobic threadlocker products.

PROPERTIES: LIQUID: Chemical Description Methacrylate/solvent based compound Color Green liquid Flashpoint, 0 F (PMCC) >2000 F (>930 C) Specific Gravity (@ 200 C) 0.828.

APPLICATION AND CURE CHARACTERISTICS: For optimum results, pre-clean parts with acetone to remove dust and grease. Pacer Anaerobic Primer can be used to speed up cure. Apply to both metal parts at bond area. Follow with Pacer Threadlocker adhesive and assemble with a twisting motion to spread adhesive. Excess adhesive on the outside of the joint will not cure, and can be removed with a solvent-soaked cloth.

STORAGE AND SHELF LIFE: For optimum results, store below 900 F (320 C) in original containers. Stored under these conditions, a one-year shelf life can be expected. 

Write Your Own Review
You're reviewing:Pacer Anaerobic Primer1 gal