Pacer ANL-22 Low Strength Removable Purple (900-5000 cP)


Pacer ANL-22 Low Strength Removable Purple (900-5000 cP)

LOW STRENGTH: Removable for locking/sealing small screws under 1/4" diameter. May be disassembled with hand tools. Meets MIL-A-46050C Type II, Grade M

Pacer ANL Series Threadlockers are formulated for use in anaerobic threadlocking, sealing, joining and fastening of metal components.

• Low, medium and high strength, oil tolerant, high temperature, and wicking grade threadlocking compounds are available for almost every fastener configuration, strength, operating requirement and fastener size.

STORAGE AND SHELF LIFE: For optimum results, store below 770 F (250 C) in original containers. Stored under these conditions, a one-year shelf life can be expected. 

APPLICATION AND CURE CHARACTERISTICS: When using threadlocking compounds on standard bolt/nut configurations, make sure mating threads are clean and dry. Apply adhesive to 3-5 male threads, allowing adhesive to fill threads completely around the fastener. Assemble fastener and tighten within a few minutes for best results. For fasteners being inserted into a blind hole, apply two or three drops of threadlocking compound to the inside of the blind hole, then apply several drops to the male threads as above, and assemble. Install fastener into the female threads a few turns, then back completely out and reinsert completely. This moves the compound further into the blind hole and prevents trapped air behind the threads from preventing the compound from filling the threads during assembly. 

Write Your Own Review
You're reviewing:Pacer ANL-22 Low Strength Removable Purple (900-5000 cP)