Pacer ANL-RC High Strength Gen. Purp. Retaining (100-300 cP)
HIGH STRENGTH: General purpose, retaining compound for retaining bearings, bushings, collars, keys and splines. has .005" gap filling capability. Allows slip fit instead of press fit parts. Meets MIL-R-46082B = Type I ASTM D5363 = Group 04, Class 1, Grade 1
Pacer ANL Series Threadlockers are formulated for use in anaerobic threadlocking, sealing, joining and fastening of metal components.
STORAGE AND SHELF LIFE: For optimum results, store below 770 F (250 C) in original containers. Stored under these conditions, a one-year shelf life can be expected.
APPLICATION AND CURE CHARACTERISTICS: When using threadlocking compounds on standard bolt/nut configurations, make sure mating threads are clean and dry. Apply adhesive to 3-5 male threads, allowing adhesive to fill threads completely around the fastener. Assemble fastener and tighten within a few minutes for best results. For fasteners being inserted into a blind hole, apply two or three drops of threadlocking compound to the inside of the blind hole, then apply several drops to the male threads as above, and assemble. Install fastener into the female threads a few turns, then back completely out and reinsert completely. This moves the compound further into the blind hole and prevents trapped air behind the threads from preventing the compound from filling the threads during assembly.