Permabond 919

Permabond 919

PERMABOND® 919 is the original allyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 919 will cure to fixture strength in 10 seconds on most surfaces, and rapidly develops high strength with full cure obtained in 24 hours. The adhesive was specifically designed to meet the high temperature resistance required by certain applications. It provides excellent bond strength to steel, aluminum, and most metal surfaces. The cyanoacrylate will also adhere well to a wide variety of other materials including most types of plastic and rubber.

In order to withstand high temperature environments, PERMABOND 919 was designed with a secondary curing mechanism that is activated at temperatures higher than 150°C (302°F). The procedure to activate this mechanism is as follows: 1) Parts are bonded and clamped at room temperature for four hours. 2) The clamped parts are then heated at 150°C (302°F) for two hours. 3). After the two hours, the bond will be thermally resistant up to 250°C (482°).

Features & Benefits
Rapid development of high strength
Ease of use – no mixing or heat cure
Bonds most materials
100% reactive, no solvent

Approved to MIL-A-46050C Type V Class 1 (existing designs)

Write Your Own Review
You're reviewing:Permabond 919