Permabond HM118 Threadlocker

Description

Permabond HM118 is a premium, high-strength general-purpose threadlocker and sealant designed for permanently securing bolts, nuts, and screws. It delivers exceptional vibration resistance, high off-torque strength, and a reliable cure at room temperature, making it ideal for various industrial applications.

Key Features and Benefits:

• Stops Vibration Loosening: HM118 secures fasteners, preventing them from vibrating loose due to engine or machine operation.
• High Off-Torque Strength: Provides superior holding power, ensuring a strong and lasting bond.
• Fast and Easy Curing: Achieves full cure at room temperature, eliminating the need for heat lamps or other curing accelerators.
• Non-Drip, Thixotropic Formula: Applies easily and stays where you put it, reducing mess and waste.
• Thread Lubrication: Allows for smoother, easier assembly while preventing seizing or galling.
• Corrosion Protection: Shields fasteners from rust and corrosion, extending their lifespan.
• Superior Environmental Resistance: Withstands harsh environments and chemicals for long-lasting performance.
• Environmentally Friendly: Contains 100% solids, making it a responsible choice.

Permabond HM118 is perfect for:

• Machinery and equipment manufacturing
• Automotive applications
• Appliance assembly
• General maintenance and repair

Permabond MM115 complies with the following industry standards:

• MIL-S-46163A
• ASTM D5363

Physical Properties:

Chemical Composition	Methacrylate esters
Appearance	Red
Viscosity @ 25°C	1,800 mPa/s (cP) Thixotropic
Specific Gravity	1.1
UV Fluorescence	Yes

Typical Curing Properties:

Maximum gap fill Maximum thread size	0.2 mm (0.008 in)
Time taken to reach handling strength (M10 steel) @23°C	10 Minutes
Full strength (M10 steel) @23°C	24 hours

 

Typical Performance of Cured Adhesive:

Torque strength (M10 steel ISO10964	Break 23 N-m (200 in. lb) Prevail 32 N-m (280 in. lb)
Shear strength (steel collar & pin ISO10123)	17 MPa (2500 psi)
Coefficient of thermal expansion	90 x 10^6 mm/mm/°C
Dielectric strength	11 kV/mm
Thermal conductivity	0.19 W/(m.K)

Compare To:

• Loctite® 262
• 3M™ Scotch-Weld™ TL62
• Permatex® High Strength Threadlocker Red