Polytek FormRub 65 Polyurethane Liquid Mold Rubber

$143.00
SKU
POL-POLYFormRub65

FormRub 65 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber Shore A65 rubber. This is a pourable rubber, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

Mix Ratio: 1A/ 1B by weight
Shore Hardness: A65
Cured Color: Hazy Yellow
Mixed Viscosity: 1500 cP

The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected. For additional physical property specifications, refer to the Physical Properties Bulletin.

FormRub Series liquid polyurethane rubbers are designed to make high-performance molds that stand up to the rigors of high-production casting and forming of concrete. In addition to concrete, FormRub molds are often used to cast plaster and wax. With use of an appropriate release agent, some resins can also be cast in FormRub molds.

Write Your Own Review
You're reviewing:Polytek FormRub 65 Polyurethane Liquid Mold Rubber