Chem-Set

Stone Seam C-30 Marblemaster “Dripless” Seaming Adhesive – 50ml Cartridge – i-Flint 2811

SKU: CCA-C30-XC-2811-50

$16.00 /EA

Special Order - 5-10 day lead time.
Note: Special order products cannot be canceled or returned.

Quantity:
  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

Stone Seam C-30 is a two-part methacrylate, super flexible, dripless/non-sag, low shrink, low exotherm, ultra violet light stable, non-yellowing hard surfacing adhesive designed for the nearly seamless bonding of porcelain, sintered stone, glass, engineered stone, marble, quartz, and natural stone products. Stone Seam C-30 Marblemaster offers a combination of high strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials.

Stone Seam C-30 Marblemaster permits the seasoned fabricator the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces, without dripping, and upon gelation, gives the fabricator an extended window (5 to 10 minutes) to de-rope, or trim with a single bladed straight edge razor blade, the excess from the stone slab without ripping the adhesive out of the joint, nor damaging the surface of the stone.

Applications:
Fabrication of mitered edges, laminations and deck seams on – 

  • Natural Stone
  • Ceramics 
  • Sintered Surfaces
  • Quartz
  • Glass
  • and more!

Advantages:

  • Non Drip / No Sag 
  • Flexible Adhesive 
  • Auto-dispense system 
  • Eliminates hand-mixing
  • Invisible seams with pre-mixed colors
  • High strength 
  • UV resistant 
  • Trimmable 
  • LOW VOC
  • Working Time: 10-15 minutes
  • De-Roping Time: 5-10 minutes
  • 90% of ultimate strength after 45-60 minutes at room temp. curing
Characteristics:
Working Time 10 – 12 min
De-roping Time 5 – 10 min
Fixture Time 20 – 30 min
Routable 45 – 60 min
Operating Temperature 65°F – 85°F (18°C – 30°C)
Gap Filling 0.250 inches — 5mm
Mixed Density 8.6 lbs/gal (0.98 g/cm^3)
Viscosity – Adhesive 200,000 – 350,000 cps
Viscosity – Activator 75,000 cps
Color – Adhesive Various
Color – Activator Colorless/Translucent
Mix Ratio 10:1
Tensile Strength – Natural Stone 4,000 – 5,000 PSI / Substrate Failure
Tensile Strength – Quartz 4,500 – 6,000 PSI / Substrate Failure
Flash Point 51°F (11°C) See SDS for more Information
Shelf Life 2 years
Resistances to: Susceptible to:
Hydrocarbons, Acids and Bases, Vinegar, Wine and condiments, Most household foods Polar solvents, Super strong acids and bases

Additional information

Weight 0.15 lbs
Dimensions 1 × 2 × 5 in
Manufacturer

Component

Ratio

Gun Size

Packaging Size General

Packaging Size Specific

Length

Width

Color

i-Flint

Country Of Manufacture

Size/Volume

Reviews

There are no reviews yet.

Be the first to review “Stone Seam C-30 Marblemaster “Dripless” Seaming Adhesive – 50ml Cartridge – i-Flint 2811”

Your email address will not be published. Required fields are marked *