Sika

Sika AnchorFix-2, High Perfomance Anchoring Adhesive 250ml

SKU: SIK112718

$33.54

Discount (%)
7.69 %
14.28 %
Quantity:
  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

Sika® AnchorFix-2 adhesive anchor system is solvent/styrene free, epoxy acrylate-based, and has been specifically formulated as a high-performance, two-component adhesive anchor system for threaded bars in uncracked concrete.

Benefits:

  • Fast curing
  • Standard caulk guns can be used
  • High load capacity

Usage:

As a fast-curing anchoring adhesive for all grades of:

  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems

In the following substrates:

  • Concrete
  • Solid masonry
  • Steel
  • Hard natural stone*
  • Solid rock*

* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2 Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration. 

Advantages:

  • Fast curing
  • Standard caulk guns can be used
  • High load capacity
  • Drinking Water certified
  • Non-sag, even overhead
  • Styrene-free epoxy acrylate
  • Low wastage
  • Fixing close to free edges.
  • Versatile range of embedment depths.
  • Anchoring without expansion forces.

Approvals/Standards:

  • EESR to AC308 by ICC-ES PENDING.
  • ESR to AC308 by IAPMO-UES.
  • Certified to ANSI / NSF – 61 by UL.

Working & Loading Times:

Cartridge

Temperature

T Work (minutes) Base Material Temperature T Load (hours)
Minimum 41°F 14 °F to 32 °F* 24 hours
Minimum 41 °F 32 °F to 41°F 180 minutes
41 °F to 50 °F 8 41 °F to 50 °F 100 minutes
50 °F to 68 °F 4 50 °F to 68 °F 70 minutes
68 °F to 77 °F 3 68 °F to 77 °F 40 minutes
77 °F to 86 °F 2 77 °F to 86 °F 40 minutes
86 °F 1 86 °F 40 minutes

T Work is the typical time to gel at the highest temperature in the range
T Load is the typical time to reach full capacity
* The design professional on the job is ultimately responsible for the interpretation of the data provided above.

Additional information

Weight 1.03 lbs
Dimensions 3 × 3 × 7.00 in
Manufacturer

Component

Ratio

Gun Size

Packaging Size General

Packaging Size Specific

Type

Must Ship Freight

Country Of Manufacture

Origin

Reviews

There are no reviews yet.

Be the first to review “Sika AnchorFix-2, High Perfomance Anchoring Adhesive 250ml”

Your email address will not be published. Required fields are marked *