Sikagard FlexCoat ATC- Acrylic Top Coat

Description

Sikagard FlexCoat ATC is a single-component acrylic finish coating for two-coat application to Sikagard® FlexCoat ATC in new or recoat work. Important characteristics of Top Coat are its durability and excellent weathering qualities.

Uses:

• Sikagard® FlexCoat ATC can be used as a top coat where uniformity is desired or colors other than Concrete Gray are desired.
• Sikagard® FlexCoat ATC is an acrylic coating that will require maintenance and recoat applications will be dependant on its exposure to foot traffic

Advantages:

• Tough, long-lasting finish
• Weather-resistant
• Excellent color retention
• VOC compliant
• No mess – self-mixing
• Offers resistance to dirt pickup and mildew
• Cost effective protection
• Vapor permeable – allows each way water vapor diffusion (breathable)

Color:

Ivory Cream, Sandpiper Beige, Provincial Tan, Adobe, Toffee, Spanish Tile, Redwood Tile, Speedway Gray, Bright Gray, Dodge City Tan, Fired Brick, and Slate Green

Packaging: 5 gal (19 L) Pail

Coverage: 300 ft²/gal/coat

Application: 

• As with all coatings, job site mock-ups should always be completed to confirm acceptability of workmanship and material.
• Any areas of glass or other surfaces should be masked.
• Sikagard® FlexCoat ATC can be applied by brush, roller, or spray over entire area moving in one direction. Sikagard® FlexCoat ATC is particularly suitable for application by spray using the most standard spray painting equipment.
• Apply first coat of Sikagard® FlexCoat ATC. Allow a minimum of 20–90 minutes prior to applying following coats (one or two depending on service conditions/requirements). At lower temperatures and high humidity, waiting time will be prolonged. At higher temperatures, work carefully to maintain a ‘wet’ edge. Sikagard® FlexCoat ATC is usually applied using a short nap lamb’s wool roller.
• Finish to specified texture.