Sta'-Put 773-40 Spray Grade Contact Adhesive, Clear - 5 Gal Pail

This is a hazardous material, shipping restrictions and surcharges may apply.

ITW STA’-PUT 773-40 is premium grade high strength contact bond adhesive. 773-40 has been specifically formulated for industrial spray use to bond a wide variety of materials, including, but not limited to, decorative laminates, metals (not copper), plywood, particleboard, foamed polystyrene (using dry spray technique), polyurethane foam and rigid plastics. 773-40 provides fast and uniform coverage in all types and sizes of spray operations..


  • High Green Strength
  • Aggressive Grab Tack
  • High Strength Bonds
  • Quick Dry Time
  • Spray Grade
  • Long Open Time
  • Excellent Adhesion to many Substrates
  • Excellent Heat Resistance

Hazardous Materials - May be subject to extra shipping cost.


Property Typical Value
Base: Compounded Polychloroprene
Solvent: Organic Solvent*
Shelf Life: 1 year from Date of Manufacture**
Color: Clear/Red
Flash Point: -34.6◦F (-37◦C)
Weight/Gallon 6.61 lbs./gal
VOC Content 609.8 g/L (EPA Method 24)
Open Time 60 minutes
Dry Time 2 - 5 minutes
Solids 17.0 ± 1.5%
Viscosity 181-220 cps
Coverage 200 ft^2/gallon @ 2.5 dry grams/ ft^2
Formaldehyde No urea formaldehyde added during adhesive manufacturing

* Reports have associated repeated and prolonged occupational exposure to solvents with permanent brain and nervous system damage

** The shelf life for an unopened container of this adhesive stored at temperatures between 60°F (15.6°C) and 95°F (35°C) is 1 year from date of manufacture. Store out of direct sunlight in a cool, well-ventilated area. Avoid storing container directly on the floor or against an outside wall

Write Your Own Review
You're reviewing:Sta'-Put 773-40 Spray Grade Contact Adhesive, Clear - 5 Gal Pail