Keep-Nut CNC Drill Bit, 11.8mm, 1/2 GAS for Sintered Stone and Porcelain

Description

11.8mm Diameter CNC Dill Drill Bit, 1/2 GAS for drilling KEEP-NUT™ press-in self-anchoring insert holes.  For use on Sintered Stones, Ultracompact stone, and Porcelain:

KEEP-NUT™ CNC Set-Up Info:

• Hole Diameter: 11.8 mm (+/- .2mm)
• RPM: 4500-5000 suggested RPM’s
• Feed Rate: Between 3/8″ – 3/4″ max (or Manufacturers recommendations if available)
• Cooling: Both Spindle and Halo cooling advised
• *Depth: Depth should match height of insert so that Keep-Nuts are flush with the surface when installed. (E.G. H6 = 6.5mm, H8.5 = 8.5mm, H15 = 15mm depth, etc.)

*Depth may vary depending on the KEEP-NUT™ press-in self-anchoring insert being used

Popular Sintered, Ultracompact, and Porcelain Materials:

• DEKTON
• Lapitec
• GEOLUXE
• DuraLosa
• Neolith
• Crossville
• Florim
• Infinity
• Sapienstone

Tips:

• Check drill hole depth and diameter with the Go/No-Go Gauge
• Use the Setting Tool to punch in the inserts