Polytek Poly 15-6 Polyurethane Liquid Plastic


Poly 15-6 Liquid Plastic is a two-part, liquid polyurethane resin that cures (RTV) to a tan, Shore D72 plastic. This product has a simple 1A:1B mix ratio by weight. When cured, it has the feel and density of hard wood or thermoplastics. Poly 15-6 is a pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

Mix Ratio: 1A/1B by weight
Shore Hardness: D72
Cured Color: Tan
Mixed Viscosity: 800 cP

Shake or Stir Part B before use. Demold time varies with thickness of casting. The thinner the casting, the longer the demold time. Shrinkage in polyurethane resins is caused by gelling while hot then cooling. Parts that cure with minimal temperature rise (exotherm) exhibit minimal shrinkage. The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected. For additional physical property specifications, refer to the Physical Properties Bulletin.

Some of these pourable, room-temperature curing resins mimic the density of thermoplastics (e.g., ABS) or wood. Others are great options for constructing lightweight mold shells, composites, or master models. Using Poly 15-Series casting resins offer a cost savings up front compared to the expensive tooling costs associated with metal molds required for injection-molded thermoplastic parts.  These plastics can be colored with PolyColor Dyes, mixed with metal powders (e.g., bronze powder) and they can be filled with a variety of inexpensive fillers to conserve cost and reduce shrinkage in large masses.

Write Your Own Review
You're reviewing:Polytek Poly 15-6 Polyurethane Liquid Plastic