Lord Maxlox MX/T18-375 ml Cartridge – Being Discontinued Due to Cartridge Change

Description

Due to supply chain challenges the cartridge on this product is being changed. A new 415ml cartridge (3032005) replaces this original 375ml cartridge (3019922). This cartridge requires different guns and mixing tips compared to the old packaging. Please contact us with any questions regarding this change.

Description 

LORD® Maxlok MX/T18 acrylic adhesives replace welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads. LORD Maxlok acrylic adhesives are available in a range of working times to accommodate a wide variety of process requirements

Features and Benefits 

Versatile– bonds a wide range of unprepared metals with minimal substrate preparation

Temperature Resistant – performs at temperatures from -40 to +300°F (-40 to +149°C)..

Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV

Precise Bondline– allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01″ (0.025 cm) diameter.

Non-Sag–remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

 

Application 

Surface Preparation–Remove grease, loose contamination or poorly adhering oxides from metal surfaces. Normal amounts of mill oils and drawing compounds usually do not present a problem in adhesion. Most plastics require a simple cleaning before bonding. Some may require abrading for optimum performance.

Mixing – Mix LORD Maxlok T3, T6 or T18 adhesive with the proper amount of LORD Maxlok MX accelerator. Handheld cartridges will automatically dispense the correct volumetric ratio of each component. Even color distribution visually indicates a thorough mix. Once mixed, the adhesive cures rapidly.