Permabond 200 Instant Adhesive

Description

Permabond® 200 is a high-viscosity cyanoacrylate adhesive designed for wire-tacking, component bonding, and general-purpose applications. It offers fast fixture times and high strength, making it ideal for plastics, rubbers, and metals. The thicker formulation prevents excessive flow, allowing for precise application in industrial manufacturing and repair settings.

This single-component adhesive cures rapidly at room temperature upon contact with surface moisture, forming a strong and durable bond.

For customers seeking alternatives to Loctite® 410, 3M™ Scotch-Weld™ CA100, or Permatex® Black Super Glue, Permabond 200 provides an excellent high-strength bonding solution.

Key Features & Benefits

✅ High-Viscosity for Controlled Application – Ideal for wire-tacking, component bonding, and gap filling
✅ Fast-Setting Formula – Achieves handling strength in 15 seconds
✅ Bonds a Wide Range of Materials – Adheres to metals, plastics, ceramics, and rubbers
✅ High Strength & Impact Resistance – Provides durable, structural bonds
✅ Single-Part, No Mixing Required – Easy-to-use for fast production
✅ 100% Solids, Solvent-Free – Eco-friendly with no VOCs

Technical Specifications

• Viscosity: 1,500 mPa.s (high viscosity)
• Gap Fill: 0.38 mm (0.015 in)
• Fixture / Handling Time:
  • Steel: 15 sec
  • Buna-N Rubber: 15 sec
  • Phenolic: 15 sec
• Full Cure Time: 24 hours
• Shear Strength (ISO 4587):
  • Steel: 22 N/mm² (3200 psi)
  • Aluminum: 8 N/mm² (1200 psi)
• Impact Strength (ASTM D-950): 3-7 kJ/m² (1.4-3.3 ft-lb/in²)
• Dielectric Strength: 250 V/mil
• Hardness (ISO 868): 85 Shore A
• Temperature Range: -55°C to 100°C (-65°F to 212°F)
• Color: Clear

Applications

• Wire-tacking applications in electronics and industrial assembly
• Bonding small components in precision manufacturing
• Medical device and electronic component assembly
• Military, aerospace, and automotive applications
• Gap-filling applications requiring strong adhesion

Directions for Use

1. Ensure surfaces are clean, dry, and grease-free. Use acetone or isopropanol for best results.
2. Apply Permabond 200 sparingly to one surface only.
3. Quickly align and press components together. Apply even pressure to ensure a thin, even adhesive film.
4. Hold in place for 15 seconds until initial bond forms.
5. Allow 24 hours for full strength development.
6. For difficult or porous surfaces, use Permabond CSA or QFS 16 Activator.
7. For bonding polypropylene, polyethylene, PTFE, or silicone, use Permabond Polyolefin Primer (POP) before applying adhesive.

🔹 Note: Permabond 200 can withstand brief high-temperature exposures (e.g., during paint baking or wave soldering processes), provided the joint is not excessively stressed.