ELANTAS EN-1556 Part A Amber Polyurethane Resin, 1 Gallon

Description

EN1556 Part A is the amber urethane prepolymer side of the ELANTAS CONATHANE EN-1556 two-component polyurethane system. This 1 gallon package is Part A only, so it must be paired with the correct EN-1556 curative before use in potting, encapsulating, casting, or molding work.

EN1556 Part A Benefits

• Part A package supports repair or replenishment of a matched EN-1556 two-component system.
• Amber prepolymer format helps operators verify the correct component before mixing.
• CONATHANE EN-1556 is used for electrical encapsulation, cable end seals, connectors, and molded parts.
• Published data lists a polyether-based polyurethane system with room-temperature or heated cure options.
• Useful in applications that require a tough elastomeric potting material with resistance to water, seawater, oils, and fuels.

This item is not a complete kit by itself. Use it only with the specified Part B curative at the current mix ratio from the technical data sheet. Confirm lot status, shelf life, and mixing instructions before opening the container.

EN1556 Part A Applications

• Electrical potting and encapsulation when paired with the correct EN-1556 curative.
• Cable breakouts, watertight connectors, cable end seals, and printed circuitry.
• Casting or molding mechanical parts that need polyurethane toughness.
• Lining or protection work on pumps, chutes, and conveyors where abrasion resistance matters.
• Maintenance programs that already specify CONATHANE EN-1556 in their build documents.

Mixing And Handling Guidance

Review the latest SDS and TDS before use. Wear the required protection, control ventilation, and keep containers closed when not dispensing. Measure the Part A and curative accurately, mix until uniform, and degas when the assembly is void-sensitive.

Keep the work area dry and clean because moisture, dust, and loose contamination can affect potting quality. Cure time depends on temperature, section depth, and the chosen room-temperature or heated process. Do not energize or ship potted assemblies until the material meets the handling and cure requirements for the job.

Technical Details And Documentation

ELANTAS and Chemical Concepts documents identify the product as CONATHANE EN-1556 Part A urethane prepolymer for industrial casting resin use. Public technical references describe the EN-1556 system as a polyether-based polyurethane used for potting, encapsulating, molding, and casting. Review current manufacturer information from ELANTAS before approving the process.

Ordering Help

For related encapsulants and potting materials, browse Chemical Concepts encapsulants and potting compounds. For help matching Part A, curative, and kit size, call (800) 220-1966 or email [email protected].