Techcon TE 32 Gauge Dispensing Needle, 1/4 In Yellow, Pack of 50

Description

32 Gauge Needle tips give dispensing teams a very fine outlet for low-viscosity fluids, primers, activators, solvents, inks, and thin adhesives. This Techcon TE series needle uses a 1/4 inch stainless steel cannula with a yellow double-helix polypropylene hub and ships in a pack of 50 for daily bench use.

32 Gauge Needle Fit And Control

• 32 gauge size supports very small dots, short lines, and controlled placement on compact parts.
• 1/4 inch cannula length keeps the tip close to the work for steady hand positioning.
• Yellow color coding helps operators separate this fine needle from larger gauges at the station.
• Luer-lock hub connects to compatible syringe barrels and dispensing adapters.
• Pack of 50 keeps clean replacement tips ready when a fine needle plugs or is damaged.

Use this needle when the application needs accuracy more than high flow. It is a practical choice for small electronics, lab sampling, primer placement, tight repair work, and detail adhesive placement where a larger tip can flood the part.

32 Gauge Needle Use Notes

Fine needles need clean fluid and reasonable pressure. Filter material when the process allows it, keep the cap on the syringe until dispensing, and avoid forcing thick or filled materials through the 32 gauge bore. If the bead slows or spits, replace the tip instead of raising pressure beyond the process window.

Techcon TE series documentation describes the line as stainless cannula tips with double-helix polypropylene hubs. The product family is made for secure syringe barrel attachment, burr-free output, electro-polished cannulas, and 100 psi maximum operating pressure in listed configurations.

Ordering The 32 Gauge Needle Pack

Choose this pack when the job calls for short-reach, fine-gauge dispensing with repeatable setup across multiple operators. Pair it with compatible barrels, pistons, caps, and other dispensing accessories from Chemical Concepts dispensers, mixers, and nozzles. For manufacturer information on the broader dispensing line, visit Techcon.

Need help matching needle gauge to fluid viscosity or dot size? Call (800) 220-1966 or email [email protected].