Nordson EFD TAH 180AN-824 Static Mixer, 24 Element

Description

TAH 180AN-824 mixer is a Nordson EFD disposable static mixer for two-component adhesives, sealants, and coatings. Its square housing, 24 mixing elements, stepped outlet, and integral nut connection support controlled mixing with a shorter nozzle body than comparable round designs.

TAH 180AN-824 mixer Benefits

• Square element geometry helps blend two-part materials in a compact nozzle length.
• 24 elements provide repeated split-and-fold mixing before the bead reaches the outlet.
• Integral nut connection removes the need for a separate retaining nut.
• Stepped outlet lets operators trim the tip for the bead size needed on the job.
• Disposable plastic construction reduces cleanup and cross-contamination between materials.

This mixer fits cartridge and meter-mix style work where the mixed bead must stay uniform from start to finish. It is a practical choice for shops running epoxies, silicones, acrylics, methacrylates, polyurethanes, polysulfides, sealants, and coatings.

TAH 180AN-824 mixer Applications

• Two-part adhesive dispensing on assembly benches and repair stations.
• Sealant and coating placement where a uniform mixed bead is required.
• Automotive, aerospace, electronics, construction, and wind repair work.
• Cartridge setups that call for a 7/8 inch by 9 integral nut inlet.
• Jobs where shorter nozzle length helps place adhesive closer to the work.

Setup And Use

Check cartridge system, inlet thread, mixer diameter, and outlet style before ordering. After installation, purge until both components are fully mixed and the bead is consistent. If the bead shows streaks, stop and inspect cartridge seating, plunger movement, and nozzle condition.

Do not leave mixed material idle in the nozzle beyond the adhesive open time. Once cure begins inside the static element, back pressure rises and the mixer should be replaced.

Technical Details And Documentation

Published references identify Nordson 7701385, also known as 180AN-824, as a 24-element disposable square static mixer with 8.7 mm element diameter, 17.3 cm length, 7.5 mL retained volume, polypropylene housing, and polyacetal elements. Review current product-family information from Nordson before production use.

Ordering Help

Pair this mixer with the correct cartridge, ratio, dispenser, and bead size. For related static mixers and dispensing accessories, browse Chemical Concepts dispensers, mixers, and nozzles.

For help comparing mixer length, element count, and outlet style, call (800) 220-1966 or email [email protected].