Description
This Techcon 700 Series syringe barrel comes preassembled with a 3cc amber barrel and a white wiper piston, ready to load and dispense without ordering the two parts separately. The amber body blocks UV and visible light up to 520 nm while staying translucent enough to see remaining fluid volume.
Where This Syringe Barrel Fits
The barrel and piston work with any 700 Series receiver head, TE or TT dispense tip, and manual or air-powered syringe gun rated for 3cc barrels. The white wiper piston seals tight against the barrel wall for low viscosity fluids and is the piston Techcon specifies for use with the TS700 manual syringe barrel gun.
Pair this barrel with a 700 Series receiver head fitted with a Viton o-ring for broad chemical compatibility, or an EPR o-ring where Viton is not compatible with the fluid. The push-twist receiver head connection speeds barrel changeovers on lines running frequent color or chemistry changes, and both barrel and piston are rated to the same 100 psi ceiling so pressure settings do not need adjustment when switching between pack sizes.
Syringe Barrel Specifications
| Attribute | Detail |
|---|---|
| Capacity | 3 cc |
| Barrel color | Amber, blocks UV/visible light to 520 nm |
| Piston | White wiper piston, full-seal design |
| Barrel material | Low-friction, chloride-free polypropylene |
| Operating pressure | Up to 100 psi (6.9 bar) |
| Pack quantity | 50 barrels with pistons installed |
Choose this preassembled barrel and piston set for light-sensitive, low-viscosity fluids such as UV cure adhesives and cyanoacrylates dispensed from a manual or air-powered gun. Browse our dispensing valves and mixer nozzles for matching receiver heads and dispense tips, or see Techcon for the full 700 Series lineup. Store unopened barrels with the tip cap installed to keep the Luer lock free of dust and cured skin before first use.
Need Help?
Need help matching piston type to your fluid viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.