Techcon 700 Series 10cc Manual Plungers, Pack of 50

Description

Techcon 700 Series 10cc manual plungers turn a compatible syringe barrel and piston into a hand dispensing assembly for small adhesive, sealant, oil, ink, and coating jobs. This pack supplies 50 plunger rods for 10cc barrels, giving maintenance benches and production cells a simple way to dispense without compressed air when a pneumatic controller is not needed.

syringe barrel plunger use

Manual plungers are useful for rework, prototype builds, field kits, and low-volume placement where the operator needs direct hand control. The rod clips to the matching manual piston, and the piston travels through the 10cc barrel as pressure is applied. That setup keeps the fluid moving from the back of the barrel toward the tip while the operator watches the bead, dot, or fill pattern at the work surface.

Use these plungers with Techcon 700 Series 10cc barrels and compatible 10cc manual pistons. Before loading fluid, confirm the piston style matches the material and the barrel size. A dry piston can suit many general bench fluids, while a lubricated piston may help with thicker materials. Keep plungers, pistons, caps, and tips together in the same kit so the assembly can be built cleanly at the bench.

syringe barrel specifications

For best handling, pair the rod with a clean barrel, a seated piston, and the correct tip cap for the fluid being dispensed. Label partial kits by size so 10cc parts are not mixed with 3cc, 5cc, or 30cc components during a busy repair or sample run.

Store the rods in sealed packaging until use to keep dust and shop debris away from the dispensing assembly. For nearby barrels, pistons, receiver heads, and tips, browse dispensers, mixers, and nozzles. Techcon syringe component information is available from Techcon.

Need Help?

Need help matching a plunger, piston, and barrel size? Call (800) 220-1966 or email [email protected].