Techcon TECA0100167 DMP Valve Body Assembly

Description

Techcon TECA0100167 DMP valve body assembly is a dispensing valve service component for precision fluid dispensing equipment. The part is used when the valve body in a DMP setup needs replacement during maintenance, repair, or rebuild work, helping keep the fluid path and mounting interface consistent with the existing equipment.

dispensing valve service use

A valve body assembly is a critical part of the dispensing path. It supports the wetted components, fittings, and outlet geometry that control how material moves through the station. Replacing a worn or damaged body can help restore a known setup after thread damage, residue buildup, or physical wear. Pair the assembly with compatible seals, fittings, tips, and controller settings for the material being run.

dispensing valve specifications

Before installation, clean surrounding hardware and confirm that the replacement body matches the valve configuration on the bench or machine. After reassembly, run a low-risk test dispense with the actual material, tip, and pressure setting. If the station also handles two-part cartridges, verify the mixing nozzle, static mixing nozzle, or static mixer nozzle used upstream so material reaches the valve in the expected condition.

Keep the part number with the job traveler or maintenance list so replacement decisions stay traceable. Match the part to the existing cartridge, valve, or station hardware before opening the package. After setup, document material name, pressure, tip or nozzle choice, first acceptable bead or shot size, and the operator notes from the test dispense so the next technician can repeat the process without guessing.

Browse related dispensers, mixers, and nozzles for valves, tips, fittings, and static mixers used around the same station. Current manufacturer information is available from Techcon.

Need Help?

Need help confirming a DMP valve body or related service parts? Call (800) 220-1966 or email [email protected].