Techcon TE Bent Dispensing Tip, 15 Gauge x 1/2 in 45 Degree Amber (50)

Description

The Techcon TE Series 15 gauge bent needle is an amber hubbed, 1/2 inch dispensing tip with a 45 degree stainless cannula for reaching around fixtures, walls, and raised part features. Techcon lists this bent TE tip with a precision bent stainless steel cannula, double helix polypropylene hub, burr-free electro-polished tube, silicone-free and chloride-free construction, and 100 psi maximum operating pressure. The larger 15 gauge bore is useful for thicker fluids than fine-gauge needles can handle.

Where the 15 gauge bent needle fits

Use this tip for adhesive, grease, sealant, oil, and flux placement when a straight needle would force an awkward hand angle. The 45 degree bend helps operators place material along sidewalls, under lips, and near fixture stops while keeping the syringe or valve body clear of the part. The amber hub identifies the gauge during fast bench changes.

How the 15 gauge bent needle performs

The electro-polished cannula supports steady flow through the bend, while the stainless tube keeps the outlet angle consistent from shot to shot. The double helix hub secures the tip to luer style barrels and valves for normal pneumatic dispensing. Confirm the bend direction before production shots and replace the tip if cured material or accidental contact changes the outlet shape.

For process control, keep the part number, gauge, length, color, bend angle, and pressure rating with the work instruction so operators can restock the same tip without guessing.

Specifications

Choose this Techcon bent tip for access-limited dispensing, or browse Chemical Concepts dispensers, mixers, and nozzles for straight, bent, and specialty tips. Manufacturer information is available from Techcon.

Need Help?

Need help choosing a bent needle angle or gauge? Call (800) 220-1966 or email [email protected].