Monarch MFSTR-1125 Keep-Nut Adjustable Clip, 1.5 in

Description

This keep-nut adjustable clip gives fabricators a way to fine-tune spacing on Keep-Nut track systems after the panel is already cut and drilled. The 1.5 in clip carries a 0.25 in mounting hole and a 1/4-20 x 0.625 in stainless adjustment bolt, so the final clip position gets set on the bench or in the field instead of being locked in back at the drawing stage.

Keep-Nut track systems are popular in cabinetry, countertop, and facade work precisely because they let a fabricator adjust hardware position after the panel leaves the shop. This clip is the piece that makes that adjustment possible: instead of a fixed mounting point, the stainless bolt lets the installer slide and lock the clip to match field conditions that never quite match the drawing, whether that is a slightly out-of-square opening, a substrate that shifted during shipping, or a wall that was not framed exactly to print. Keeping that adjustment in stainless hardware also means the clip holds its setting through repeated seasonal expansion and contraction instead of loosening over time.

Keep-Nut Adjustable Clip Features

• 1.5 in continuous-length clip, cut from Monarch’s MFSTR-1125 profile
• 0.25 in diameter mounting hole sized for standard Keep-Nut hardware
• 1/4-20 x 0.625 in stainless adjustment bolt for on-site fine positioning
• Continuous MFSTR-1125 stock is available in lengths up to 144 in for custom clip runs
• Manufactured by Monarch Metal Fabrication to the MFSTR-1125 engineering print

Keep-Nut Adjustable Clip Applications

• Adjustable Keep-Nut clip positioning on cabinetry and countertop panels
• Facade and cladding assemblies that need field-adjustable anchor spacing
• Metal fabrication runs using continuous Keep-Nut track rather than fixed point anchors
• Retrofit or field-repair situations where the original clip position no longer lines up

This clip pairs with Chemical Concepts’ Keep-Nut threaded inserts for a complete adjustable mounting system. See Monarch Metal Fabrication for the full MFSTR clip and continuous track lineup. For sizing or bolt-length questions, call (800) 220-1966 or email [email protected].