Description
Fasbond CT150 Cyanoacrylate is a toughened instant adhesive built for fast, high-strength bonds on plastics, rubber, and metal. This 2 oz bottle holds a clear, low-viscosity formula rated at 5 cps, so it wets into tight-fitting joints quickly and sets to handling strength in under 5 seconds, with full cure reached in 24 hours.
Where Fasbond CT150 Cyanoacrylate Gets Used
This adhesive is built for assembly lines and repair benches that need a fast set without clamping or fixturing time. Typical applications include bonding injection-molded plastic housings, tacking rubber gaskets and grommets ahead of a primary sealant, joining small metal stampings, and general point-of-use repair on wood, leather, and most porous substrates. The 0.002 in maximum gap fill keeps the bond line thin on close-tolerance parts, which matters on snap-fit housings and small mechanical assemblies where excess adhesive squeeze-out would interfere with fit. Shops running mixed plastic and rubber assembly lines often keep this grade on hand specifically because one formula covers both substrate types without a change in dispensing technique.
How Fasbond CT150 Cyanoacrylate Holds Up
The toughened chemistry resists the brittleness that limits standard ethyl cyanoacrylates. Where an untoughened CA can crack under vibration or shock loading, this formula carries more flex and impact resistance once cured, which extends service life on parts that see handling, vibration, or repeated flexing. Surface prep matters: degrease with isopropyl alcohol and dry fully before applying, since oils and moisture slow the cure and weaken the bond. Apply a thin, even bead. Excess adhesive extends cure time rather than adding strength, and a thin bond line is both stronger and faster to set than a thick one. A light clamp or hand pressure for the first few seconds after mating parts improves final bond strength more than any amount of extra adhesive volume.
| Property | Value |
|---|---|
| Color | Clear |
| Viscosity | 5 cps |
| Max Gap Fill | 0.002 in |
| Fixture Time | Under 5 seconds |
| Full Cure | 24 hours |
| Package Size | 2 oz bottle |
| SKU | HLA-FASBOND-CT150-2oz |
This bottle is sized for bench and line use where a full case of CA is not needed. Browse the full cyanoacrylate adhesives line for faster-set and gap-filling grades, or see the manufacturer’s toughened CA range on the Heartland Adhesives site.
Need Help?
Need help matching cyanoacrylate viscosity and cure speed to your substrate? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.