Description
The TS1050-45 spreader nozzle lays a flat ribbon of adhesive or sealant in a single pass, angled 45 degrees off the cartridge axis to reach into corners and along edges a straight tip cannot. The 1/2 inch wide orifice spreads an even film across the work, and the 1/4 inch NPT thread mounts directly to standard cartridges, manual guns, and sealant cartridge adapters.
Where the TS1050-45 Spreader Nozzle Fits
Reach for it on laminating, panel bonding, and edge sealing jobs that need a wide, consistent film rather than a round bead. The 45 degree angle keeps the cartridge and your hand clear of the surface, which helps on flat panels, countertops, and assemblies with limited clearance. The natural polypropylene body stays non-reactive with most one-part and two-part adhesives, silicones, and sealants.
How the TS1050-45 Spreader Nozzle Holds Up
Molded from natural high-density polypropylene, the nozzle handles dispensing pressure up to 100 psi. The flat 1/2 inch by 1/16 inch opening produces a repeatable ribbon thickness, and the 4 inch length gives reach without flex at the tip. The material is inexpensive, so the nozzle works as a consumable and gets swapped out once product cures inside.
| Spec | Detail |
|---|---|
| Spread width | 1/2 in (12.7 mm) |
| Orifice | 1/2 in x 1/16 in (12.7 x 1.59 mm) flat |
| Tip angle | 45 degrees |
| Overall length | 4 in (101.6 mm) |
| Thread | 1/4 in NPT |
| Material | Natural high-density polypropylene |
| Max pressure | 100 psi |
| Item number | TECTS1050-45 |
Order the TS1050-45 when the job calls for a wide, angled ribbon instead of a round bead. For more tips, nozzles, and static mixers, browse our dispensing nozzles and mixers, or see the full line at Techcon.
Need Help?
Need help matching a spreader width to your bead profile? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.