400 Series Manual Plunger, 60cc

Description

The Techcon 400 Series 60cc manual plunger is the rear pushrod for a standard 60cc syringe barrel dispensing setup. It seats against the piston inside the barrel and transfers hand or air pressure evenly across the fluid, so adhesives, epoxies, potting compounds, and sealants dispense in a controlled, consistent bead instead of surging or skipping.

Molded from polypropylene to match the wall tolerances of Techcon’s 400 Series line, this plunger is built for the same barrels used across CC’s dispensing catalog: 3cc, 5cc, 10cc, 30cc, and 60cc sizes. Assemblers and production techs who run manual dispensing stations know that a worn or mismatched plunger is the first thing to check when a bead goes uneven, since the plunger-to-piston fit is what keeps pressure distribution flat across the barrel diameter.

Fits standard syringe barrel systems

This 60cc plunger is sized to Techcon’s 400 Series barrel family, the same syringe barrel platform used in most manual and semi-automatic dispensing setups at small and mid-size assembly shops. It pairs with the corresponding 60cc piston and barrel, and with Techcon manual dispensing guns for one-part fluids that don’t need refrigeration or light protection.

Where this plunger fits in a syringe barrel line

Production lines running epoxy potting, cyanoacrylate assembly, or RTV sealant application typically stock plungers as a consumable alongside barrels and pistons, since the plunger takes the repeated mechanical load of every dispense cycle. Keeping a stock of 460L-4 plungers on hand means a shop can swap a worn one in seconds rather than idling a station waiting on a full barrel kit.

Chemical Concepts stocks the full range of Techcon 400 Series dispensing and mixing accessories, so barrels, pistons, plungers, and tips can be ordered together for a complete station rebuild. For material specifications on the broader 400 Series platform, see Techcon’s manufacturer site.

Questions about barrel and piston compatibility before you order? Call (800) 220-1966 or email [email protected] and our team will confirm the right plunger, piston, and barrel combination for your dispensing setup.