Description
The 400 Series receiver head connects a Techcon 400 series dispenser to a 10cc syringe barrel through 3 feet of air tubing, forming the accident-proof link every pneumatic dispensing valve needs between controller and barrel. A fitted Viton o-ring seals the barrel connection and a male quick connector locks the assembly to the dispenser output.
How this dispensing valve accessory works
Air pressure from the 400 series controller travels down the 3 foot hose to the receiver head, which transfers pressure into the syringe barrel to drive fluid through the tip. The same dispensing valve platform also runs 6-foot hose and no-hose (R suffix) versions of this receiver head for different bench layouts. Shops pairing the barrel with a static mixer, a mixing nozzle, or a 2 part mixing nozzle for two-component dispensing use the identical receiver head regardless of which mixing nozzle follows the barrel, and a jb weld mixing nozzle setup for structural repair work runs the same 10cc barrel and receiver head combination. Keeping a spare receiver head on hand means a torn o-ring or a kinked hose does not stop a production line waiting on a single part. The quick connector lets a tech swap the whole assembly at the dispenser in under a minute, without disturbing the air supply routing to the rest of the bench.
Dispensing Valve Receiver Head Specifications
| Spec | Detail |
|---|---|
| Compatible platform | Techcon 400 Series dispensers |
| Barrel capacity | 10cc |
| Hose length | 3 feet |
| Max operating pressure | 100 psi (6.9 bar) |
| Seal | Viton o-ring |
Order this receiver head to replace a worn hose assembly or to add a second station to your 400 Series bench. Pair it with 10cc barrels and pistons from our precision dispensing equipment and mixers category. Techcon documents the full 400 Series platform on its Techcon site.
Need Help?
Need help matching hose length or barrel capacity to your 400 Series setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.