Techcon 400 Series Receiver Head, 35cc, No Hose

Description

The 400 Series receiver head in the R configuration connects a Techcon 400 series controller to a 35cc syringe barrel without pre-attached tubing, giving a rebuild crew the option to reuse existing hose runs on an established dispensing valve station. A fitted Viton o-ring seals the barrel connection.

How this dispensing valve receiver head differs

The R suffix marks the no-hose version of the 400 Series receiver head, built for benches that already have air line routed to the station and only need a fresh head and seal. The larger 35cc barrel size handles higher-volume shots than the 10cc version on the same dispensing valve platform. Stations running a static mixer, a mixing nozzle, or a 2 part mixing nozzle downstream use the identical receiver head regardless of mixing nozzle choice, and a jb weld mixing nozzle setup for two-component structural repair draws from the same 35cc barrel and receiver head combination. Ordering the no-hose configuration avoids paying for tubing a shop does not need when the bench air line is already routed and only the head and seal have failed. It also lets a maintenance team standardize hose length across a bench instead of inheriting whatever length ships with a bundled assembly. Keep a spare head on the shelf next to your syringe barrels so a torn o-ring or worn quick connector never idles a bench waiting on a single part during a production run.

Dispensing Valve Receiver Head Specifications

Order this receiver head when you are rebuilding an existing 400 Series station and want to reuse the current air line. Find 35cc barrels and pistons in our precision dispensing equipment and mixers category. Techcon documents the full 400 Series platform on its Techcon site.

Need Help?

Need help confirming barrel capacity or hose routing for your station? Call (800) 220-1966 or email [email protected].