Techcon 600-100 6 Inch Nylon Plugged Rod

Description

The Techcon 600-100 is a 6 inch nylon plugged rod, one of the dispensing valve parts used inside Techcon Techkit two-component cartridge systems. The solid, plugged tip lets the operator ram a fluid component forward by hand in barrier and taped barrier style Techkits, where the cartridge is worked manually rather than driven by a gun or plunger.

Where these dispensing valve parts fit

• Fits barrier and taped barrier type Techkits for two-component adhesives, sealants, and similar fluids
• Solid plugged tip pushes a fluid component through the cartridge chamber under hand pressure
• Companion parts in the same family include the 800-100 eight inch rod and the 610-100 nylon valve rod, so shops running mixed Techkit sizes can standardize spares across several cartridge lengths
• Built to work with other Techcon Techkit components rather than mixed third-party rods

Techkit cartridges are common on benches that mix two-component epoxies, urethanes, or sealants in small batches where a powered dispenser is not justified. The plugged rod is a wear item on these kits, since repeated manual ramming works the nylon tip against the cartridge wall over time. Keeping a spare rod on hand avoids a line stoppage when the working rod wears, cracks, or goes missing between jobs. Because the rod length and tip style are matched to a specific Techkit configuration, confirming the cartridge type before ordering helps avoid a rod that binds or fails to seat correctly.

Dispensing valve parts specifications

• Material: nylon, opaque white
• Length: 6 in
• Tip style: plugged (solid)
• System: Techcon Techkit barrier and taped barrier cartridges

Order the 600-100 when a Techkit cartridge needs a replacement plugged rod for manual ram dispensing. Browse related dispensers, mixers, and nozzles. For current manufacturer information, visit Techcon.

Need Help?

Need help matching rod length or tip style to your Techkit cartridge? Call (800) 220-1966 or email [email protected].