Description
Tensorgrip S104 is an adhesive cleaner and remover for cleaning overspray, decal residue, hoses, spray guns, and other adhesive equipment. It is intended for common industrial surfaces such as FRP or GRP, metal, aluminum, plastics, and sheeting when compatibility is tested first. For related cleanup products, see Chemical Concepts sealers and cleaners. The product family is made by Tensor Global.
Tensorgrip S104 Cleaning Uses
The technical sheet identifies S104 as a cleaner and remover designed to remove adhesives and other tough substances. Listed advantages include strong cleaning and degreasing power, non-corrosive behavior, compatibility with most plastics, cleaning of hoses and spray guns, and decal adhesive residue removal. That makes it useful for fabrication shops that use canister contact adhesives and need a practical cleanup product near the spray area.
Tensorgrip S104 Application Notes
For surface cleaning, hold the spray gun or nozzle 6 to 10 inches from the surface, apply an even coat, and wait 3 to 5 minutes before wiping for best cleaning performance. For gun and hose cleaning, connect the cleaner canister after the adhesive canister is disconnected, then flush until clear. The TDS also advises testing in an inconspicuous area before use.
Handling Notes
Use appropriate shop ventilation and read the SDS before use, especially around ignition sources and sensitive substrates. Keep containers out of direct sun and avoid storage above 120°F. Because residue type, dwell time, and surface coating can change results, trial cleaning on scrap or a hidden area is the safest way to confirm suitability.
Buying Guidance
Use this SKU when adhesive residue, canister hose cleanup, spray gun purge, or decal residue removal is part of the workcell. Store above 60°F for reliable spray performance. For help pairing cleaner with Tensor canister systems, contact Chemical Concepts at (800) 220-1966 or [email protected].
Reviews
There are no reviews yet.