APS Gel 300 Gram Cyanoacrylate Adhesive RP800-06

Description

The 300 gram bottle of this cyanoacrylate gel is the size you reach for when single-gram tubes can’t keep up with the bench. RP800-06 from the APS Gel line is the same gel-viscosity formula as the smaller bottles, just sized for repetitive production work. Rubber, plastics, leather, cork, wood, and porous substrates all bond cleanly without the runs you get from thin CA.

Why a 300 gram cyanoacrylate gel changes the workflow

Switching from a few-gram tube to a 300 gram bottle cuts handling time per part dramatically. The bottle dispenses through a controlled nozzle so technicians get consistent bead size shift after shift. Gel viscosity holds the bead in place on vertical and overhead joints. Full cure runs about 24 hours, but handling strength comes inside the first minute on most substrates.

Specs for this cyanoacrylate gel

• Container: 300 gram bottle
• Form: gel viscosity, non-drip
• Bonds: rubber, plastics, leather, cork, wood, porous substrates
• Set time: 10 to 30 seconds on most substrates
• Full cure: 24 hours
• Storage: refrigerate sealed to maximize shelf life

Best practices for the 300 gram cyanoacrylate gel

Decant into smaller working bottles if your bench team won’t burn through the 300 grams within a few months of opening. Cyanoacrylate cures from atmospheric moisture, so frequent open-and-close cycles on a large bottle shorten its life. Clean surfaces with isopropyl alcohol and dry-fit before applying. A light bead on one side is plenty. Excess only slows down the cure.

Need a smaller container for low-volume use? The same gel is available in 3 gram and 20 gram bottles. The full instant-adhesive lineup lives in our cyanoacrylate adhesives category. For questions on storage, dispensing equipment, or volume pricing call (800) 220-1966 or email [email protected]. The Adhesive and Sealant Council’s overview of surface preparation for cyanoacrylate bonding is a useful reference.