Albion 400-G01 24 Inch Deluxe Manual Cartridge Extension Gun

Description

Albion 400-G01 is a 24 inch Deluxe manual cartridge extension gun for standard 10 oz and 300 mL cartridges. It gives installers extra reach for overhead, recessed, and awkward joints without relying on hard-to-pump extension nozzles that can add back pressure and bead control problems.

Albion 400-G01 Benefits

• Twenty-four inch extension length helps operators reach overhead joints, deep returns, and hard-to-access bead paths.
• Manual Deluxe drive uses Albion’s 1/4 inch square rod platform for common silicone, acrylic latex, and polyurethane cartridges.
• Lightweight construction helps crews position the tool during longer passes and service work.
• Extension carriage can be lengthened with additional 8 inch segments when the job requires more reach.
• Standard 10 oz and 300 mL cartridge fit keeps the tool useful across common sealant and adhesive programs.

This tool is a strong fit for installers and maintenance teams that need reach more than volume. It can help apply a neat bead around overhead panels, high wall joints, recessed trim, equipment housings, and other places where a normal cartridge gun puts the operator at a poor angle.

Where Albion 400-G01 Fits

• Overhead sealant work on panels, frames, soffits, and mechanical openings.
• Construction and maintenance joints where a short gun cannot reach squarely.
• Shop fabrication tasks using 10 oz silicone, acrylic latex, or polyurethane cartridges.
• Field repair kits for crews handling mixed cartridge materials.
• Jobs where a longer tool is preferred over adding extension nozzles to the cartridge tip.

Surface Preparation and Use

Clean the joint before dispensing and confirm that the cartridge material is compatible with the substrate. Cut the nozzle to the required bead size, puncture the seal, and test flow before starting overhead work. Keep steady pressure on the handle and maintain a consistent angle so the bead wets both sides of the joint.

If the reach is still short, confirm whether an additional extension segment is appropriate for the job. Longer tool setups can change the feel of the stroke, so test the bead path before working on finished surfaces.

Technical Details and Documentation

Chemical Concepts and Albion references list this tool as a 24 inch extension gun for standard 10 oz and 300 mL cartridges. Published details include lightweight assembly, compatibility with silicone, acrylic latex, and polyurethane rubber, and optional 8 inch extension segments under part 395-G07. Review current manufacturer information from Albion Engineering before specifying tool kits.

Ordering Help

For related cartridge guns, nozzles, and dispensing accessories, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching reach, cartridge size, and material viscosity, call (800) 220-1966 or email [email protected].