Albion 873-2 Clear Standard B-Line Sausage Nozzle

Description

Albion 873-2 nozzle is a clear standard narrow tip for B-Line bulk and sausage dispensers using the 873-5 ring cap. Crews cut the plastic tip to match bead size, then discard it after sealant, adhesive, firestop, or glazing work.

Albion 873-2 nozzle Benefits

• Clear plastic body lets technicians see material flow before the bead reaches the work surface.
• Cut-to-size end supports round bead control across narrow joints, edges, and fixture work.
• Compatibility with the 873-5 ring cap keeps one nozzle style stocked for B-Line bulk and sausage guns.
• Disposable format reduces cleanup time when crews change colors, chemistries, or jobsite materials.
• Small replacement part helps keep production moving when nozzles cure shut or get trimmed too wide.

This nozzle is a practical consumable for shops running Albion B-Line guns on cartridges, sausages, and bulk packs. Keep extras near the bench so operators can change bead size without stopping to clean a used tip.

Albion 873-2 nozzle Applications

• Firestop sealant placement around penetrations and rated wall assemblies.
• Structural glazing, curtain wall, and window perimeter sealant work.
• Roofing adhesive and sealant beads where a narrow round outlet is needed.
• Construction joint filling from B-Line sausage dispensers.
• Shop adhesive dispensing for fixtures, panels, and repair benches.

Surface Preparation and Use

Cut the tip square or at a controlled angle based on the joint and required bead shape. Start with a smaller opening, test on scrap, and trim again if the bead needs more volume.

Confirm the 873-5 ring cap is tight before pressurizing the gun. Keep the nozzle path clean, and replace the tip when cured material, sand, or filler begins to distort the bead.

Technical Details and Documentation

Albion lists part 873-2 as a B-Line clear standard narrow plastic nozzle for B-Line sausage dispensers, with round bead output and use with ring cap 873-5. Review current gun compatibility and accessory details from Albion Engineering before changing an approved dispensing setup.

Dispensing and Ordering Help

For related tips, caps, adapters, and manual sausage guns, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching nozzles to your gun and material, call (800) 220-1966 or email [email protected].