Description
The ASI 174 5.5 oz squeeze tube holds white siliconized acrylic latex caulk from American Sealants in a hand-squeeze package, no caulking gun needed. It suits touch-up, punch-list, and small repair joints, like a gap at a trim return, a backsplash corner, or a spot on a tub surround. It’s the same white ASI 174 as the 10.2 oz cartridge, with the same approvals and paint schedule. Made in the USA.
Part of the ASI 174 family. This is the white 5.5 oz squeeze tube. ASI 174 also comes in white and clear, in 10.2 oz cartridges and 5.5 oz squeeze tubes. See every ASI 174 size and color, with white and clear specs side by side and the full application steps.
Key Product Details
| Property | Value |
|---|---|
| SKU | ASI-174-WHITE-5OZ |
| Color | White |
| Package | 5.5 oz squeeze tube |
| Dispensing | Squeezed by hand, no caulking gun needed |
| Chemistry | One-component siliconized acrylic latex, no mixing |
| Viscosity (Spindle 7, 4 rpm) | 402,500 cps |
| Skin formation time (70°F, 50% RH) | 30 minutes |
| Hardness (ASTM C661) | 40 Shore A |
| Elongation at break (ASTM D412) | 400% |
| Solids | 84% |
| Density (ASTM D1475) | 13.25 lb/gal |
| Gun grade | Pass, non-slump |
| QUV weathering (ASTM G154) | Pass, 4,000 hours |
| Service temperature | -20°F to 180°F, intermittent to 230°F |
| Application temperature | 40°F to 90°F |
| Paint over | Latex paint after 2 hours, oil-based paint after 24 hours |
| Full adhesion and strength | 7 days |
| Primer | Not normally required |
| Cleanup | Warm water while wet |
| Freeze-thaw | Passes 5 freeze-thaw cycles without harm to the product |
| Approvals | ASTM C920, Class 12.5 TT-S-00230C, Class B VOC compliant |
| Shelf life | 12 months from date of shipment at 70°F and 50% RH |
| Country of manufacture | USA |
Choosing the 5.5 oz Squeeze Tube
- No gun to carry. The tube rides in a tool bag or service van for punch-list stops.
- The smaller package leaves less material over when the job is only a few joints.
- For long runs, the 10.2 oz cartridge carries nearly twice the material and runs in a caulking gun.
- White carries the ASTM C920 Class 12.5 and TT-S-00230C Class B approvals, same as the cartridge.
Frequently Asked Questions
Do you need a caulking gun for the ASI 174 5.5 oz tube?
No. The ASI 174 5.5 oz squeeze tube is dispensed by hand, so no caulking gun is needed.
Is the ASI 174 tube the same caulk as the 10.2 oz cartridge?
Yes. It’s the same white ASI 174 in a smaller package, with the same ASTM C920 Class 12.5 and TT-S-00230C Class B approvals.
Can you paint over white ASI 174?
Yes. White ASI 174 takes latex paint 2 hours after application and oil-based paint after 24 hours. If you’re unsure about a specific paint, test it first.
When should I buy the tube instead of the cartridge?
Buy the 5.5 oz tube for touch-up and a handful of joints where you don’t want to carry a gun. Buy the 10.2 oz cartridge for full runs of trim, backsplash, or tub and tile.
How long does ASI 174 keep in the squeeze tube?
Shelf life is 12 months from date of shipment when stored at 70°F and 50% RH. High temperature and high humidity shorten it, and the tubes should be kept from freezing.
Related Products
- ASI 174 Siliconized Acrylic Latex Sealant family page for every size and color, white and clear specs side by side, and the full application steps
- Albion 7/8 in Caulk Tooling Spatula for tooling the bead
Questions on fit for your joint or paint schedule? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.