Techcon TS7000 Cartridge Assembly, 8-Pitch High Output

Description

The Techcon TS7000 8-pitch high output cartridge assembly pairs a high output feed screw with a matched chamber in one sealed unit for the TS7000-DCX-8HO rotary auger valve. These dispensing valve parts raise throughput over the standard 8-pitch cartridge without moving to a coarser, less precise pitch.

Where High Output Dispensing Valve Parts Fit

Lines running heavier fill volumes per cycle, such as potting compounds, thermal gap fillers, or thicker structural adhesives, use the high output cartridge to hold cycle time targets without switching to a larger-pitch screw that would sacrifice placement accuracy. Because the screw and chamber ship as a matched cartridge, output volume per motor rotation stays consistent from the first cycle after installation.

How These Dispensing Valve Parts Compare to Standard Output

The high output geometry moves more fluid per revolution than the standard 8-pitch screw while keeping the same envelope, so it drops into the same TS7000 valve body and cartridge housing. Shops that already standardized on TS7000-DCX-8 valves can move up to high output cartridges for specific product lines without buying a different valve platform.

Note the cartridge’s install date alongside the valve’s pitch designation on a maintenance log, since a high output cartridge nearing the end of its duty cycle shows the same symptoms as a clogged tip: shorted dot volume that a quick tip swap will not fix. Confirm the valve’s existing pitch designation before ordering, since an 8-pitch high output cartridge will not interchange with a 16-pitch or 32-pitch valve body. Browse related rotary valve hardware in the Dispensers, Mixers & Nozzles category at Chemical Concepts. Techcon’s TS7000 user guide covers pitch selection and output rates at Techcon.

Need Help?

Need help confirming whether your application needs high output or standard pitch? Call (800) 220-1966 or email [email protected].