Techcon TS7000 Cartridge Body

Description

The Techcon TS7000 cartridge body is one of the dispensing valve parts Chemical Concepts stocks for shops running Techcon’s TS7000 series rotary auger valves. This is the feed screw chamber assembly that mounts to the valve body, and it is the wear component that sees the most direct contact with the fluid being dispensed.

The Core Dispensing Valve Parts Inside a TS7000 Rotary Valve

The TS7000 IMP series uses a rotary displacement feed screw inside this cartridge body to push fluid through the valve with tight, repeatable control, which is why it shows up so often in electronics assembly, medical device production, and 5G component manufacturing where dose accuracy matters. Techcon’s divorced cartridge design keeps the fluid path isolated from the motor, so this cartridge body can be pulled and swapped for cleaning or feed screw changes without removing the entire valve from the dispensing machine or robot arm.

Matching Feed Screws and Other Dispensing Valve Parts

This cartridge body accepts Techcon’s precision-hardened feed screw inserts in 8-pitch, high-output 8-pitch, 16-pitch, and 32-pitch configurations, so the same valve body can be reconfigured for different flow rates by swapping the feed screw rather than buying a new valve. Chemical Concepts carries the surrounding dispensing valve parts, tip kits, receiver head assemblies, mounting brackets, and cleaning kits, alongside this cartridge body so a maintenance team can restock a full TS7000 valve without sourcing parts from multiple vendors.

Because the cartridge assembly is rated for continuous-duty cycling at 300-plus cycles per minute, this is a part that wears with use and should be kept on hand as a spare for any production line running TS7000 valves around the clock. Swapping a worn cartridge body takes only a few minutes and does not require recalibrating the rest of the dispensing robot or fixture.

See the full Dispensers, Mixers & Nozzles category for feed screws, tip kits, and other TS7000 accessories. For help confirming this cartridge body matches your valve configuration, call (800) 220-1966 or email [email protected]. The Adhesive and Sealant Council’s report on reusable adhesive dispensing systems covers how precision dispensing hardware supports consistent output at scale.