Chem-Set H2O Glue Mixing Board, 6 x 8 in Disposable Mixing Surface

Description

The H2O Glue Mixing Board is a disposable 6 x 8 in mixing surface for hand-proportioning and blending Chem-Set H2O Glue, the two-part underwater and wet-surface epoxy. It gives an applicator a clean, rigid work area to combine resin and hardener to a uniform color before troweling or knifing the mix onto a damp or submerged repair.

Where the H2O Glue Mixing Board Helps

Pool and spa technicians, marine crews, and tank and fountain repair teams use this board to mix small batches at the point of work, often at the waterline where a paper pad would fail. The rigid backing supports firm mixing pressure so resin and hardener reach a full, streak-free blend, which matters because an underwater epoxy that is not fully mixed will not cure to strength. A flat, replaceable surface also keeps grit and old adhesive out of the fresh batch.

How the H2O Glue Mixing Board Works

Dispense equal parts of the H2O epoxy onto the top sheet, work them together with a stir stick or putty knife until the color is uniform, then load your tool straight off the board and apply. After the batch, tear off and discard the used sheet to expose a clean surface for the next mix. Sizing the board at 6 x 8 in gives room to fold and knead a two-part epoxy without spilling over the edge.

Specifications

Keep a board on hand wherever H2O Glue gets mixed so every batch starts on a clean surface. Browse related two-part epoxy products to match adhesive and accessories to your repair. For underwater and wet-surface mixing and application demonstrations, see the Chemical Concepts YouTube channel.

Need Help?

Need help matching H2O epoxy and accessories to your wet repair? Call (800) 220-1966 or email [email protected].