Description
The Devcon manual applicator gun dispenses 400 mL dual cartridges at a 1:1 ratio for two-part epoxies, structural acrylics, and urethanes. A closed bracket frame holds the cartridge square to the plungers, and each trigger pull advances both sides together so the material reaches the mixer at the correct blend.
Where the Devcon Manual Applicator Gun Earns Its Keep
It is the practical way to run 400 mL 1:1 cartridge systems for repair and assembly without a powered dispenser. The hand trigger gives control over bead size on small jobs, and the rigid bracket keeps the cartridge stable through a full draw. A manual gun travels well, so the same tool covers shop benches and field repairs without a power source. Replacement plungers and brackets keep an older gun in service rather than scrapping it. For cartridges, mixers, and nozzles to pair with it, see our dispensers, mixers, and nozzles category.
Devcon Manual Applicator Gun Specifications
Load a 400 mL 1:1 cartridge into the bracket, fit a static mixer, and prime a short bead to confirm even flow before applying to the part. Release plunger pressure between beads to stop drool, and wipe the cartridge nose so the next mixer seats clean. Steady, even trigger pressure produces a consistent bead and helps the two parts meter together from the first shot to the last. Store the gun with the trigger released to protect the rack and plungers.
| Attribute | Detail |
|---|---|
| Brand | Devcon (ITW Performance Polymers) |
| Cartridge | 400 mL |
| Ratio | 1:1 |
| Frame | Closed bracket, manual trigger |
| Material types | Epoxy, acrylic, urethane |
Match the gun ratio to your cartridge system and keep spare mixers staged so each job starts with a fresh tip. For the full applicator line and adhesive data, visit Devcon.
Need Help?
Need help confirming cartridge ratio and mixer fit for your adhesive? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.