Techcon TS1212 Valve Flange

Description

The Techcon TS1212 flange is dispensing valve parts hardware for servicing the disposable pinch tube valve body. The flange sits in the TS1212 spare-part stack with the body, cylinder cap, gasket, spring, shutoff piston, and pinch cushion, helping the valve stay aligned as the air signal opens the fluid path and the internal spring pinches it closed after each dispense cycle.

Where dispensing valve parts support valve alignment

Pinch tube valves depend on repeatable compression. If the flange area is bent, worn, or no longer seating cleanly, the valve can lose the crisp shutoff that keeps dots and beads consistent. A damaged flange can also make other service parts look like the problem because the piston and gasket are no longer working against a stable surface. Replacing the flange during a rebuild helps restore the mechanical stack before the operator adjusts pressure, timing, or stroke settings to compensate.

The TS1212 design keeps the wetted path inside the disposable tube, so this flange normally does not contact adhesive or sealant directly. It still matters to process control because it supports the structure around the pinch point. Keep it organized with valve service hardware rather than cartridge accessories. A mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle is selected for cartridge blending at the outlet, while this flange is a reusable valve repair component.

dispensing valve parts specifications

Ordering dispensing valve parts for TS1212 rebuilds

Order the flange when a TS1212 valve has a worn or damaged service stack and the rest of the dispense station can stay in place. For pinch tubes, fluid lines, tips, and related accessories, browse dispensers, mixers, and nozzles. For TS1212 valve details, visit Techcon.

Need Help?

Need help deciding which TS1212 service part is causing alignment or shutoff problems? Call (800) 220-1966 or email [email protected].