Techcon Black Fluid Line Assembly, 60 in, Male/Female

Description

This black polyethylene fluid line belongs with the small dispensing valve parts that keep a bench or automated dispense setup moving material from a reservoir, syringe, manifold, or valve to the point of use. The line has a 0.100 in inside diameter, a 60 in length, and molded male and female Luer lock ends, giving technicians a long, controlled transfer path without improvising tubing and fittings at the workstation.

Where these dispensing valve parts fit

A 60 in fluid line is useful when the supply container, pressure pot, or controller sits away from the valve body, or when an operator needs more reach around a fixture. The molded Luer lock fittings help the line connect to standard Luer lock hardware without adding extra adaptors at each end. This part is tubing, not a mixing nozzle, a 2 part mixing nozzle, or a jb weld mixing nozzle. Use it when the process needs a single fluid transfer line, then pair it with the correct static mixer or dispensing tip downstream if the material system requires mixing at the outlet.

The black PE construction is often selected when operators want an opaque line for visibility contrast on the bench or when the station already uses black tubing as a visual cue. The 0.100 in bore gives more flow area than very small needle tubing while still staying compact enough for dispensing valves and Luer lock fittings. Techcon rates the fluid line assembly for working pressure up to 100 psi when used with compatible connectors, which covers many low to moderate pressure dispensing stations.

How dispensing valve parts like this are handled

• Pack quantity: 10 fluid line assemblies.
• Tube size: 0.100 in ID by 60 in long.
• Connection style: male Luer lock to female Luer lock.
• Material and color: black polyethylene tubing.
• Use case: fluid transfer between compatible dispensing components.

Route the line with enough bend radius to avoid kinking, and keep the fittings clean before connecting them to a valve, syringe barrel, or manifold. If cured adhesive collects inside the line or a fitting face is damaged, replacing the assembly is usually faster than trying to clear a partial blockage. For related valves, fittings, syringes, and accessories, browse Chemical Concepts dispensers, mixers, and nozzles. Techcon product family information is available from Techcon.

Need Help?

Need help matching a fluid line to your dispensing valve or controller? Call (800) 220-1966 or email [email protected].