Description
Araldite 2022-1 adhesive is a two-component methacrylate for fast assembly work on metals, plastics, composites, and other substrates that can be difficult to bond. This 380 mL cartridge uses a 1:1 mix ratio, cures at room temperature, and gives fabricators a toughened adhesive with gap filling to 4 mm for production bonding, repair, and prototype work.
Key Features and Benefits
- 1:1 cartridge format keeps setup simple for bench, maintenance, and production dispensing.
- Toughened methacrylate chemistry handles mixed-material joints that need impact resistance and useful elongation.
- Approximate 10-minute pot life gives enough working time to position parts without dragging out the cycle.
- Gap filling to 4 mm helps bridge uneven surfaces and real-world fit-up conditions.
- Good resistance to gasoline, oils, and weather exposure supports demanding service environments.
- Works on metals, thermoplastics, and composite materials used in transportation, equipment, and general manufacturing.
Common Applications for Araldite 2022-1 adhesive
- Bonding aluminum, steel, and stainless components in fabricated assemblies
- Joining ABS, PVC, PMMA, polycarbonate, and other plastics in housings and trim
- Composite and FRP part assembly where mechanical fastening would add weight or print-through
- Marine, transportation, and industrial repair work that needs a room-temperature cure
- Prototype and short-run assembly where cartridge dispensing is preferred over bulk mix equipment
Compatible Materials
- Aluminum, galvanized steel, stainless steel, copper, and brass
- ABS, PVC, PMMA, PC, and other thermoplastics
- SMC, CFRP, GRP, and other composite laminates
- Dissimilar material joints where movement and toughness matter
Araldite 2022-1 adhesive Technical Specifications
| Property | Value |
|---|---|
| Brand | Huntsman Araldite |
| SKU | HUN4757208 |
| Chemistry | Toughened methacrylate adhesive |
| Mix ratio | 1:1 by volume |
| Package size | 380 mL cartridge |
| Pot life | About 10 minutes at 25°C (100 g mix) |
| Gap filling | Up to 4 mm |
| Tensile strength | 45 MPa (ISO 527, typical) |
| Elongation at break | Greater than 5% (ISO 527, typical) |
| Storage | 24 months at 2 to 8°C in sealed containers |
Packaging and Ordering
Use this cartridge when you need a structural acrylic that gives a better balance of speed, toughness, and gap filling than a brittle adhesive system. Pair it with the right structural acrylic adhesives and mixing accessories from Chemical Concepts. For technical data and surface preparation guidance, review Huntsman documentation for Araldite 2022-1.
Need Help?
Need help matching this cartridge to a dispensing gun, mixer, or substrate combination? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.