Pyrosil

Pyrosil P2 Cartridge for Plastics, GVE2 HB Unit – 330 Gram (11.6 oz) Cartridge

SKU: PYR-PC-P2-330G

$188.31
You save /EA

Special Order - 7-12 day lead time.
Note: Special order products cannot be canceled or returned.

330 g Pyrosil P2 cartridge for plastics, for the GVE2 HB unit. Gas mix with Pyrosil precursor for UV-curing paint, ink, and glue adhesion.

Quantity:
  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

The Pyrosil P2 cartridge is a 330 g (11.6 oz) gas cartridge for treating plastics with the GVE2 HB flame treatment unit. It holds a propane and butane mix dosed with Pyrosil® precursor, and the flame deposits a silicon dioxide layer 5 to 100 nanometers thick on the part. SURA Instruments describes that layer as an adhesion promotion layer for UV-curing paints, inks, and glues. It is made in Germany.

For metal, glass, and ceramic parts, SURA lists the MGK cartridge instead. Call us at (800) 220-1966 to order MGK or to confirm the right cartridge for your parts. This P2 cartridge does not fit the FB25 hand burner, which has its own refill cartridge.

Key Product Details

Property Value
Product Pyrosil P2 Cartridge (SKU PYR-PC-P2-330G)
Material Suitability Plastic
Fits GVE2 HB unit only
Cartridge Size 11.6 oz (330 g)
Contents Propane and butane gas mix with Pyrosil precursor
Layer Deposited Silicon dioxide, 5 to 100 nm
Application Adhesion promotion layer for UV-curing paints, inks, and glues
Cartridges for Continuous Work Two
Country of Manufacture Germany (SURA Instruments)

Performance in Production

  • SURA notes that using two cartridges on the GVE permits continuous work.
  • The GVE2 HB runs on 330 g cartridges. The FB25 hand burner uses a different refill.
  • Plastics need 1 to 3 flame passes with the GVE2 HB hand burner. Test a sample to set your own pass count.
  • Metal, glass, and ceramic parts need the MGK cartridge, not this one.
  • Print, coat, or bond within 30 minutes of treatment. SURA’s maximum is 12 hours.
  • Pyrosil gas forms explosive mixtures with air. Remove ignition sources, don’t smoke, and ventilate for longer work.

Common Applications

  • Adhesion promotion layer for UV-curing paints on plastic parts
  • Adhesion promotion layer for UV-curing inks on plastic parts
  • Adhesion promotion layer for UV-curing glues on plastic parts
  • Adhesive bonding on plastics in production
  • Medium and large plastic parts, treated by hand or inline
  • Hand treatment of plastic parts with the GVE2 HB hand burner

Available Sizes

  • Pyrosil P2 Cartridge for Plastics, GVE2 HB Unit, 330 Gram (11.6 oz) Cartridge, SKU PYR-PC-P2-330G

Related Products

How Pyrosil Flame Treatment Works

Pyrosil treatment is combustion chemical vapor deposition (CCVD). The precursor in the cartridge burns in the flame to silicon dioxide, which deposits on the part and gives paints, inks, and glues a surface they bond to. The shop steps look like this:

Water on two flat panels: the panel labeled Pyrosil shows a spread-out drop, the other shows beaded droplets

Water spreads on the Pyrosil-labeled panel and beads on the other panel.

  1. Start with a clean, dry plastic part. Contamination you can’t see, such as fingerprints, moisture, and oils, can interfere with bonding.
  2. Fit a P2 cartridge to the GVE2 HB and light the hand burner.
  3. Treat with the non-luminous (oxidizing) part of the flame. Keep the luminous part off the part.
  4. Move the flame gently up and down the surface, 1 to 3 passes. Run a sample first, and avoid dwelling on one spot.
  5. Within 30 minutes (12 hours maximum), print, coat, or bond.

Frequently Asked Questions

What is the Pyrosil P2 cartridge?

It is the 330 g gas cartridge for treating plastics with the GVE2 HB flame treatment unit. It holds a propane and butane mix with Pyrosil precursor, which the flame turns into a silicon dioxide layer on the part.

Which cartridge do I need, P2 or MGK?

P2 is for plastics. SURA lists the MGK cartridge for metal, glass, and ceramic, so use MGK on those parts. We can supply MGK for the GVE2 HB by phone at (800) 220-1966.

Does the P2 cartridge fit the FB25 hand burner?

No. The P2 cartridge is for the GVE2 HB. The FB25 hand burner uses its own refill cartridge.

How many cartridges do I need?

SURA notes that using two cartridges on the GVE permits continuous work. Keep a spare on hand if your treatment runs through a shift.

How long can I wait between treatment and printing, coating, or bonding?

SURA recommends processing within 30 minutes, and no later than 12 hours, after treatment.

Does Pyrosil help UV-curing ink and paint stick to plastic?

SURA lists the P cartridge for plastic, as an adhesion promotion layer for UV-hardening paints, inks, and glues. Results depend on your plastic, ink, and cure, so run a test batch before production. Call us with your material and we’ll help you set up the test.

Is the Pyrosil cartridge safe to handle and ship?

Handle it like any propane and butane product. Pyrosil forms explosive mixtures with air, so remove ignition sources and don’t smoke. SURA says the process forms no toxic or harmful reaction products, and recommends good aeration or an exhaust, and a fume hood for longer work. The cartridge ships as a hazmat product.

What does Pyrosil treatment do to a surface?

It deposits a silicon dioxide layer 5 to 100 nanometers thick that gives UV-curing paints, inks, and glues a surface to bond to.

Questions on fit for your plastic part or bonding process? Call (800) 220-1966 or email [email protected].

Additional information

Weight 1.0000 lbs
Product Restrictions

Must Ship Freight

Country Of Manufacture

Reviews

There are no reviews yet.

Be the first to review “Pyrosil P2 Cartridge for Plastics, GVE2 HB Unit – 330 Gram (11.6 oz) Cartridge”

Your email address will not be published. Required fields are marked *

You may also like…