Huntsman Araldite 2054-05 Structural Adhesive 490 mL Low Shelf Life

Description

Araldite 2054-05 is a two-part toughened methacrylate structural adhesive in a 490 mL cartridge for bonding metals, composites, and plastics. This low shelf life listing is best suited for buyers who can confirm date code, storage condition, and near-term use before committing it to production work.

Araldite 2054-05 Benefits

• Five-minute open time supports fast fixture work on prepared transportation and industrial parts.
• High elongation helps bonded assemblies tolerate movement, vibration, and mixed-material stress.
• Weathering and aging resistance make it useful for exterior and vehicle-related assemblies.
• 1:1 mix format works with matched cartridge dispensing equipment and static mixers.
• 490 mL package size suits larger beads and repeated production bonding compared with small cartridges.

This adhesive is a fit for repair, prototype, and clearance applications where the buyer understands the shelf-life status and can run a bond check before full release. Do not use expired or short-dated material in critical assemblies without internal approval and testing.

Where Araldite 2054-05 Fits

• Metal-to-composite bonding in transportation and specialty vehicle work.
• Plastic, composite, and metal assemblies needing fast room-temperature cure.
• Clearance jobs where known shelf-life status is documented before use.
• Fixture bonding, panel attachment, and stiffener installation.
• Production trials where five-minute open time is preferred over longer variants.

Surface Preparation And Use

Prepare clean, dry bonding surfaces and remove oil, release agents, oxidation, loose paint, and shop dust. Abrade metals and composites when the process allows it, then clean again with a compatible solvent. Dispense through the correct 1:1 static mixer and discard the first small amount until color and flow look uniform.

Because this is a low shelf life or expired listing, verify cartridge condition before use. Check for separated material, blocked outlets, weak mix quality, or slow cure. Run a small coupon test on the actual substrates before using the adhesive on saleable assemblies.

Technical Details And Documentation

Published Araldite 2054-05 data lists a toughened methacrylate chemistry, five-minute open time, greater than 30 percent elongation at break, and resistance to temperatures up to 212 degrees F, with e-coat post-cure exposure up to 392 degrees F. Review current manufacturer resources from Huntsman before approving the adhesive for production.

Ordering Help

For current structural acrylic and methacrylate options, browse Chemical Concepts structural adhesives. For help checking cartridge age, mixer fit, and replacement options, call (800) 220-1966 or email [email protected].